A 140 × 23 mm co-extrusion WPC decking board — the first co-extruded (capped) product in the range, built on a different technical road from all the uncapped boards before it. A conventional WPC board extrudes one material through and through; this board extrudes a dense engineering-polymer cap layer onto the core simultaneously, in-line, fusing core and shell into one piece on the same production line — it cannot delaminate or peel.The 140 × 23 co-extrusion board is for the briefs that ask for colour that lasts, stains that don't stick and handling that stays light: premium residential gardens, terraces, balconies and guesthouses — the customers who pay for how it looks in year five.

WPC Co-Extrusion Decking 148 × 22.5 mm (2.75 kg/m) — the wide-board option in our capped composite line. A polymer shell is co-extruded around the core in a single pass and fully bonded 360°, so it will not peel, delaminate or lift at the edges. The result is built-in weather resistance: UV-stable and fade-free, holding its factory colour after years in the sun; a dense, non-porous surface that repels coffee, sauce and oil stains — wipe once and it's clean, no staining, no mould; waterproof, scratch- and wear-resistant, with no painting, oiling or waxing ever needed. The 22.5 mm profile weighs just 2.75 kg per meter — solid underfoot yet light to handle, transport and install, ideal for rooftop terraces, balconies and poolside areas where weight and labour matter. And at 148 mm it is wider than standard 140 mm boards, so you need fewer boards and fewer joints for a more continuous, seamless-looking deck. 

WPC Co-Extrusion Decking 140 x 23 mm (4.12 kg/m) is the heaviest board in our capped range - at 4.12 kg per meter the 140 x 23 section is almost fully filled, giving a volumetric density of 1.28 g/cm3, a notch denser than our standard solid formula. You feel that weight underfoot: a solid, drum-free step, no flex under a crowd, no deformation under sustained load, and far less risk of wind uplift. The dense core also holds fixings firmly, so installation locks in first time. Its weather resistance comes from a polymer shell extruded in step with the core and fused into it - not a laminated film, so there is no layer to peel, blister or lift at the edges. UV exposure won't bleach the colour, rain won't leave it damp or mouldy, and oily or saucy spills wipe straight off the sealed surface - no paint, no wax, ever. With 140 mm width and 23 mm thickness it is the balanced ratio for a wide range of decks: ground-level gardens, terraces, walkways and pool surrounds. Weather resistance with real substance - the heavy-duty answer in our co-extrusion line.

WPC Co-Extrusion Decking 140 x 20 mm (3.576 kg/m) is the slim board in our dense co-extrusion range. It comes off the same core recipe as the 140 x 23 mm - a volumetric density of 1.277 g/cm3 against 1.280 - so the density is identical and only the height drops by 3 mm. Those 3 mm buy you three things: lower total weight per square metre (0.54 kg less per meter), which matters on rooftops, balconies and mezzanines with load limits; a deck that sits lower, so steps, edge trims and transitions to doors or interior floors are far easier to detail; and less material per square metre, for a friendlier purchase cost. The weather resistance comes from a shell that is grown onto the core during extrusion - one composite body with no interface to peel - so it will not delaminate or lift. No paint, no wax. The density of a solid co-extrusion board, with less height, less weight and less cost - that is the 140 x 20 mm.

WPC Co-Extrusion Decking 150 x 25 mm (4.73 kg/m) is the largest section in our dense co-extrusion range and the best of the range at spanning. With a 150 mm face and 25 mm thickness behind a dense formula (1.261 g/cm3), the section delivers a second moment of area of roughly 195,000 mm4 - about 2.1 times that of the 140 x 20 mm dense board and 1.38 times the 140 x 23 mm. And its weather resistance is not a coating on the surface - it is the section itself: the shell wraps continuously around the profile and is extruded in step with the core as a single body, so there is no facing to peel and no seam to leak. For long spans, less framing and lasting weather resistance in a solid co-extrusion board, the 150 x 25 mm is the top of the range.

WPC Fence Board 140 x 20 mm (2.1 kg/m) is a board designed to stand upright. A fence works the opposite way to a deck: the board is hung vertically, it carries no foot traffic, and weight becomes a liability rather than an asset. It bears down on posts and rails, it loads the footings, and over the years its own weight is what makes a board sag and pull at its end fixings. So this board is made with a hollow, lightweight section - just 2.1 kg per meter, close to 40% lighter than the same size in solid WPC. Spread over the fence area that is roughly 15 kg of board per square metre against 24.5 kg for a solid board; on a 1.8 m garden run the saving in dead weight alone is substantial.  140 x 20 mm WPC fence board, 2.1 kg/m - a hollow section 40% lighter than solid board. Lighter on posts, faster to install, and it will not rot, split or ever need painting.

WPC Wall Cladding 156 x 21 mm (1.86 kg/m) is a board that takes lightness as far as it will go. Cladding works in a completely different direction to decking: it hangs on a wall, and weight brings it nothing but trouble. So this board is made as a thin-wall hollow section - 1.86 kg per meter, less than half the 4.02 kg/m that the same size would weigh in solid WPC, a saving of 54%. And afterwards there is no heavy board dragging on its fixings, sagging or working loose. At 156 mm the face is an efficient covering width - wider than the usual 140 mm and 150 mm, so you use fewer boards and fewer joints and the wall reads as one continuous surface. The 21 mm thickness keeps each board stiff and the joints flat, with no bowing or sagging between fixings.  156 x 21 mm WPC wall cladding, 1.86 kg/m - half the weight of solid board, goes straight over an old wall, one person can fix it, and it never needs painting.

WPC Fence Board Flat 140 x 20 mm (2.5 kg/m) is the steadier board in the range. Same 140 x 20 size, but at 2.5 kg per meter it carries 0.4 kg more than the lightweight hollow board - and that extra material all goes into the board itself, with a higher fill rate and thicker walls. The 140 mm face means fewer joints and full screening, and the 20 mm thickness keeps the board stiff. Outdoor performance is unchanged: it takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. For a fence that is steadier, stands up to wind and is easier to keep clean, choose the flat board. For the lightest board and the fastest install, choose the 2.1 kg/m. 140 x 20 mm flat fence board, 2.5 kg/m - more material behind it, stands up to wind, and a flat face that is easy to keep clean.

WPC Fence Board Embossed 140 x 20 mm (2.5 kg/m) is the board in the range with the most timber character. At 2.5 kg per meter its section - fill rate and wall thickness - is identical to the flat board of the same size; the difference is entirely in the face. The surface is pressed in the die with a wood grain that rises and falls in relief.The 140 mm face means fewer joints and full screening, and 20 mm of thickness behind 2.5 kg per meter keeps the board solid: on coastal sites, rooftops and open windy ground it will not flex or rattle, and it stands up to children, balls and everyday knocks.  140 x 20 mm embossed fence board, 2.5 kg/m - real timber texture, hides scratches and scuffs, and looks better the longer it is up.

WPC Fence Board Embossed 160 x 20 mm (2.6 kg/m) is the most efficient board in the range. At 160 mm the face is 20 mm wider than the usual 140 mm, and worked out over real quantities that matters: to cover one square metre of fence, a 140 mm board needs 7.14 m of board while a 160 mm board needs only 6.25 m - 12.5% less board outright. And it is not only board you save.It takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. For a large area where you still want the texture of timber, the 160 mm board uses the least board, has the fewest joints and takes the least labour. 160 x 20 mm embossed fence board, 2.6 kg/m - a 160 mm face that uses 12.5% less board and leaves 12.5% fewer joints for the same area.

WPC Co-Extrusion Fence Board 160 x 20 mm (2.351 kg/m) is the most sun-proof and the lightest large-area option in the range. Co-extrusion is the generational step in this product family: as the core is extruded, a polymer shell is applied around it in the die and fused into it as one body.The 160 mm face also makes it an economical option: 6.25 m of board covers a square metre, 12.5% less than a 140 mm board. And at 2.351 kg per meter it is the lightest board in the range - a square metre of fence weighs only about 14.7 kg, lighter even than the 140 mm hollow board, so posts and footings carry the least.  160 x 20 mm co-extrusion fence board, 2.351 kg/m - just 14.7 kg per square metre, a UV-stable shell that will not fade, and 12.5% less board for the same area.

WPC Wall Cladding Flat 156 x 21 mm (1.861 kg/m) is the plainest board in the range and the easiest to live with. The face is completely flat - no pressed grain, no grooves - so a finished wall reads as one clean plane. Light falls evenly across it instead of being broken into light and dark bands by a texture, and the result is a modern, minimal, unfussy look. That flat face brings three practical advantages. The 156 mm face means fewer boards and fewer joints, the 21 mm thickness keeps each board stiff and the joints flat, and the hollow chambers add thermal and sound insulation. Outdoor performance is unchanged: it takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. For a clean, unfussy wall that is easy to keep clean and can carry lettering and light fittings, the flat board is the one made for it.

WPC Wall Cladding Straight Grain 168 x 21 mm (2.2 kg/m) is the most design-led board in the range, and the widest. At 168 mm it has the broadest face we make: covering one square metre takes only 5.95 m of board, 7.2% less than a 156 mm board and nearly a sixth less than a 140 mm one. Joints fall by the same margin, so there is less to line up, fewer trims to close and less labour, and the wall is broken up less often - from a distance it reads closer to one continuous sheet of finish. A 168 mm face with 21 mm of thickness keeps each board stiff and the joints flat, and the hollow chambers add thermal and sound insulation. Outdoor performance is unchanged: it takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. For a wall whose proportions you want to tune with line, on the widest face and with the fewest joints, the 168 mm straight grain board is the one made for it.

WPC Wall Cladding Wavy 211 x 28 mm (3.16 kg/m) is the most sculptural board in the range, and the widest. Start with the plain commercial point: at 211 mm it has the broadest face we make, and covering one square metre takes only 4.74 m of board - 20% less than a 168 mm board, 26% less than 156 mm and a full third less than a standard 140 mm. Weight is still low: at 3.16 kg per meter and about 15 kg of board per square metre, one person can lift a board into position and fix it, battens do not need closing up, the wall needs no strengthening, and on renovation work it goes straight over existing tiles or painted render with no strip-out and no waste to cart away. Outdoor performance is unchanged: it takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. To give a whole wall sculptural depth and shadow with one board - on the widest face and with the fewest joints - this is the one.

WPC Wide Wavy Wall Cladding 219 x 26 mm (2.83 kg/m) is the widest board in the range and the lightest wavy board per square metre. At 219 mm it covers a square metre with only 4.57 m of board - 3.7% less than a 211 mm board, 23% less than 168 mm and more than a third less than a standard 140 mm. Cleaning follows the same logic as any wavy board: the face is a series of slopes that will not hold water, so rain runs straight off and carries the dust with it, leaving no ponding marks; dust settles slowly in the recesses and a hose now and then is the normal upkeep - more than a flat board needs, far less than timber slats demand. Outdoor performance is unchanged: it takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. For a large wall that needs the least board, the least weight per square metre and a sculpted face, the 219 mm is the one built for it. 219 x 26 mm wavy WPC wall cladding, 2.83 kg/m - the widest face in the range at 4.57 m of board per square metre, and the lightest wavy board at about 12.9 kg per square metre.

WPC Co-extruded Wavy Wall Cladding 219 x 26 mm (2.85 kg/m) is the widest board in the range, the only fully capped board we make, and the lightest wavy board per square metre. At 219 mm it covers a square metre with only 4.57 m of board — 3.7% less than a 211 mm board, 23% less than 168 mm and more than a third less than a standard 140 mm — and joints fall by the same proportion, so a large elevation is broken up the fewest times of any board we make and reads as one continuous finished surface. At 2.85 kg per meter it works out at about 13.0 kg of board per square metre, 13.1% lighter than the 211 x 28 mm — the lightest wavy board we make — so on large facades, high-level elevations and over-cladding work you spend the least material and put the least load on the fixings. 219 x 26 mm co-extruded wavy WPC wall cladding, 2.85 kg/m — the widest face in the range at 4.57 m of board per square metre, the lightest wavy board at about 13.0 kg per square metre, and the only fully capped board we make.

We are a professional wood plastic composite cladding manufacturer, product appearance texture, good physical properties, with the unique stability of polymer materials.

The products are non-deformation and non-fading, easy installation, no maintenance, time-saving and labor-saving, is an excellent choice of wall decoration plate.

Co-extruded WPC decking, plastic wood and protective layer integrated extrusion molding, with stronger wear resistance, scratch resistance, dirt resistance and weather resistance, more beautiful and durable.

Wood-plastic co-extruded decking has excellent durability. It uses high-density plastic to wrap wood fibers to make the floor surface harder and more wear-resistant. This allows it to withstand the stress and wear and tear of daily use and household activities, extending the life of your decking.

WPC Great Wall panel can be used for indoor and outdoor wall decoration. It is named because its cross section is similar to the Great Wall.

WPC Great Wall panel can be used for indoor and outdoor wall decoration. It is named because its cross section is similar to the Great Wall.Great Wall panels can also be used as fences or grilles.

Enhance Your Space with Wood-Plastic Long Wall Paneling.Create a Stunning Wall with Sustainable Wood-Plastic Long Boards.

Wood-plastic co-extruded decking has excellent durability.  WPC Co-extrusion Decking, a masterpiece of craftsmanship and innovation. With a stunning blend of durability and aesthetics, our decking is designed to elevate your outdoor spaces to new heights of elegance.    

Enhance Your Space with Wood-Plastic Long Wall Paneling.Create a Stunning Wall with Sustainable Wood-Plastic Long Boards.