WPC Co-extruded Wavy Wall Cladding 219 x 26 mm (2.85 kg/m) is the widest board in the range, the only fully capped board we make, and the lightest wavy board per square metre. At 219 mm it covers a square metre with only 4.57 m of board — 3.7% less than a 211 mm board, 23% less than 168 mm and more than a third less than a standard 140 mm — and joints fall by the same proportion, so a large elevation is broken up the fewest times of any board we make and reads as one continuous finished surface. At 2.85 kg per meter it works out at about 13.0 kg of board per square metre, 13.1% lighter than the 211 x 28 mm — the lightest wavy board we make — so on large facades, high-level elevations and over-cladding work you spend the least material and put the least load on the fixings. 219 x 26 mm co-extruded wavy WPC wall cladding, 2.85 kg/m — the widest face in the range at 4.57 m of board per square metre, the lightest wavy board at about 13.0 kg per square metre, and the only fully capped board we make.

WPC Wall Cladding Wavy 211 x 28 mm (3.16 kg/m) is the most sculptural board in the range, and the widest. Start with the plain commercial point: at 211 mm it has the broadest face we make, and covering one square metre takes only 4.74 m of board - 20% less than a 168 mm board, 26% less than 156 mm and a full third less than a standard 140 mm. Weight is still low: at 3.16 kg per meter and about 15 kg of board per square metre, one person can lift a board into position and fix it, battens do not need closing up, the wall needs no strengthening, and on renovation work it goes straight over existing tiles or painted render with no strip-out and no waste to cart away. Outdoor performance is unchanged: it takes in no water, so it will not rot, split, host insects or grow mould; UV-stabilised so the colour will not bleach; no paint and no wax, ever. To give a whole wall sculptural depth and shadow with one board - on the widest face and with the fewest joints - this is the one.